Reach the maintenance room
Find the Entertainment Bunker entrance near the western forest crash area. The laptop in the Rebreather cave can reveal it on the GPS, but the entrance exists before the green marker appears.
Enter the surface cave, pass the cave-in and reach the L-shaped utility tunnel. At the junction, the room directly ahead has two yellow construction signs. It contains the printer and a sleeping bag for sleeping and saving.
This room is before the Maintenance Keycard door. The later gym and bunker areas have additional requirements; the early printer does not.
Load resin and print
- Collect Printer Resin and manually load it into the machine.
- Select a recipe on the connected laptop.
- Check that the machine contains the required amount.
- Start the print and wait for it to finish.
- Take the item from the print bed and confirm it in the inventory.
Recipe costs
| Item | Output | Resin cost |
|---|---|---|
| Arrows | 5 | 50 |
| Flask | 1 | 100 |
| Red Mask | 1 | 150 |
| GPS Case | 1 | 75 |
| Grappling Hooks | 2 | 100 |
| Tech Mesh | 1 | 250 |
| Sled | 1 | 1000 |
These are game resin costs from the reference table, without an added real-world volume unit. Check the displayed cost in your build.
If printing will not start
Check that resin is in the machine, not only in your inventory, that the amount is sufficient and that a print is not already running. This guide covers this early maintenance-room printer, rather than routes to every printer on the island.